Supply Anhui standard automobile paint room, cheapest car paint room brand: Yang Yong Model: YY-01 Type: Electric heating oil heating oil dual-use outer diameter: 7 * 5 * *m inner diameter: 6.9 * 3.9 * 2.6m mist treatment: Dry Wet Working temperature: 30-60 degrees sheet: 5-10cmEPS board 5-10cm wool board heating: electric heating oil heating fan: 3KW 4KW 1.5KW lighting energy-saving fan: 8 Group dome light outsole: 10 # 12 # channel steel grille: 3 * 33 * 43 * 5 cotton filter models: S-600 control box: leakage protection thermostat paint into the fan capacity: 24,000 average wind speed: 0.35 heating rate: 3-5min illumination: 800 air filtration efficiency:> 98% Noise: <75db Payment: Paypal or down payment cash on delivery methods: car or logistics power: 31 or 7KW Automotive Painting Note: 1. Spray before repair. For that existed before the body parts connected spray patching fruitful remedy such defects. Repair method commonly used are: soft metal fill, soft metal fill surface defects have good adhesion, the process is simple and see the impact of strong advantages. Aluminum foil plates filled resin, synthetic resin pre-coated aluminum foil, with a convenient, fast and features; 2 polished. Currently they use a dry mill grinding tools; if you still hand-sanding, sanding pad flat sandpaper should be carried out in the fight template for a larger area should be replaced by a large number of grinding plate, so that not only grinding effort, and sanding The polished quality stuff, when grinding narrow parts water chestnut, to use smaller sanding block. In the absence of sanding sandpaper block only when the general sandpaper painting is sandwiched between the thumb and the palm of the hand flat on the surface, when the hand-polished action should be uniform, not anxious, operations should also be alternating direction when polished, Otherwise overexert prone depression; 3. secondary degreasing car: auto body surface even after cleaning, paint, rust, repair and other processes, but sheet metal repair retained dirt, grease and tools on the old paint is not original oil to remove the front part of the primer cleaned, will affect its adhesion, even after spraying paint peeling off or phenomenon will appear. Therefore, the paint still need oil. Best to use a wax cleaner, wipe with a clean dry cloth, painted surfaces can be.